ME2S-2560-15U3M

The ME2S-2560-15U3M camera is a monochrome USB3.0 Vision camera with the CMOS sensor and higher performance FPGA. The ME2S-2560-15U3M camera has opto-isolated I/Os that adapt to specific needs. Four-side mounting holes provide maximum installation flexibility for ME2S-U3. Thanks to the extremely compact (29mm × 29mm), robust metal housings and locking screw connectors, the MERCURY2 Super cameras can secure the reliability of cameras deployed in harsh environments.

Features

Two exposure time modes: Standard / UltraShort
Acquisition Burst Mode
Support Gamma, Binning, Digital Shift, Black Level and Flat Field Correction
Support Sharpness, Noise Reduction, Timer and Counter

Programmable LUTs and User Set Control
Support Remove Parameter Limit to expand the range of exposure, gain, white balance, and so on
User Data Area for saving algorithm coefficients and parameter configuration

Specifications

Model	ME2S-2560-15U3M
Product Families	MERCURY2 SUPER
Resolution	5064×5064
Frame Rate (fps)	15.4
Sensor	1.1" Global shutter CMOS
Pixel Size	2.5μm
Pixel Bit Depth	8bit，10bit，12bit
Data Interface	USB3.0
Lens Mount	C
Spectrum	Mono
Pixel Formats	Mono8，Mono10，Mono12
Signal Noise Ratio	41.03 dB
Exposure Time	UltraShort: 1μs~2.4μs, Standard: 3μs ~ 1s
Gain	0dB ~ 24dB
Binning	1×1, 1×2, 1×4, 2×1, 2×2, 2×4, 4×1, 4×2, 4×4
Decimation	-
Reverse X/Y	Reverse X/Y
I/O Interface	1 input and 1 output with opto-isolated, 1 programmable GPIO
Power Requirement	Power over USB3.0
Power Consumption	3.90 W @ 5 VDC
Operating Temp.	0°C ~ +45°C
Storage Temp.	20°C ~ +70°C
Operating Humidity	10% ~ 80%
Dimensions (W×H×L)	29 mm × 29 mm × 38.8 mm (w/o connectors)
Weight	60g
Conformity	CE, RoHS, FCC, ICES, UKCA, USB3.0 Vision, GenICam